Na'urar Tuber Servo LQ ZT1962S

Na'urar Tarin Gasa ta Servo LQ ZT1962S Hoton da aka Fito

Takaitaccen Bayani:

Babban daidaito, ƙarancin karkacewa:
● Mai sauƙin aiki, canza diamita ta hanyar shigar da shi cikin kwamfuta.
● Ya dace da samar da jakunkuna don foda da barbashi, kamar siminti, turmi da sinadarai.
● Nauyin gram na kayan takarda ya kamata ya kasance tsakanin 70-100 g/m².
● Yana iya samar da bututun takarda da aka yi daga yadudduka 2-4 na takarda ko yadudduka 2-3 na takarda da kuma Layer 1 na PP ko PE.

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Hoton Inji

Sigogi na Fasaha

Nau'in Inji	LQZT1962S
Takalma mai tsayi, bututun da ke da inci (mm)	500-1100
Tsawon bututun yanke madaidaiciya (mm)	500-1100
Gefen A, faɗi (mm)	350-620
Gefen mai siffar M, faɗi (mm)	≤80
Yanke	Madaidaiciya + Matakala
Layer	Takarda mai layi 2-4 ko takarda mai layi 2-3 + PP ko PE mai layi 1
Matsakaicin saurin ƙira	Bututu 180/minti
Matsakaicin diamita na keel takarda (mm)	φ1300
Girman na'urar (m)	28.72x2.38x2.875
Ƙarfi	35KW

Tsarin Bugawa

● Sashen bugawa (zaɓi ne).
● Bugawa mai launi huɗu; ta amfani da buga wasiƙu masu sassauƙa.
● Domin samar da jakunkunan takarda masu tsayi daban-daban, ya zama dole a canza abin naɗin farantin bugawa da kuma ƙafafun da aka ƙayyade; Idan tsawon bututun takarda iri ɗaya ne, farantin da aka cire daga bugawa kawai ake buƙatar a maye gurbinsa.
● Canza launi yana buƙatar fara tsaftace harsashin da abin naɗin farantin bugawa; Yi amfani da abin naɗin anilox na yumbu don yin tawada daidai gwargwado.
● Idan na'urar ta daina aiki, za a yi amfani da na'urar buga takardu ta hanyar silinda, sannan a raba farantin roba da na'urar buga takardu domin hana bushewar tawada na'urar buga takardu da kuma manne takardar.

Tsarin Racks na Reel

● Rukunin injin yana da rukunoni 5 na masu riƙe takarda, kuma na'urar ɗaukar takarda tana amfani da shaft mai kumburin iska, wanda ya dace da aiki da kuma wurin da ya dace. Kowane mai riƙe takarda yana da na'urar daidaitawa ta axial don daidaita na'urar zuwa wurin da ya dace.
● Belin birki na yau da kullun don sarrafa matsin lamba na takarda (ana iya ƙara na'urar sarrafa birki mai maganadisu); Sanya takardar da aka ajiye a cikin maƙallin da babu komai, sannan a yi amfani da tef ɗin manne don manne shi da takardar da ke gab da ƙarewa, don a sami sauƙin canza takarda.
● Na'urar riƙe takarda ta farko tana da na'urar sarrafa jagora don gano wurin da tef ɗin takarda yake.

Tsarin Gyara

● Ajiye tef ɗin takarda a kan hanyar da aka tsara don tabbatar da ingantaccen aiki bayan an gama aiki da kuma daidaita ingancin samfur, ta haka ne inganta inganci da adana kayan aiki.
● Ɗauki tsarin mai matakai huɗu, kowanne layi yana da na'urori masu layi biyu, injinan servo za su iya tuƙa na'urorin bisa ga wani kusurwa don motsawa hagu da dama, sannan a sanya musu na'urori masu auna sigina don gano gefen tef ɗin takarda don sarrafa matsayin na'urar sannan a gyara matsayin.