Injin Jakar Takarda Mai Cike da Taya Mai Cike da Taya don Sayarwa
Injin Jakar Takarda Mai Lanƙwasa ...
Suna da Samfuri:
1. Suna: Injin Jakar Takarda Mai Ciyar da Takarda Mai Sauƙi ta Atomatik.
2. Samfuri: Sanda na takarda na gefe na LQ-35H(TF) a kan takardar saman.
Tsarin Musamman na Na'ura:
1. Tsawon yanke gefen sama na jaka: tsawon da aka zaɓa 188.4mm.
2. Diamita na rami: 4mm. 5mm. 6mm.
Nisa tsakanin ramuka biyu: 80mm. 100mm. 120mm.
3. Na'urorin mannewa: saiti ɗaya (Nordson daga Amurka).
4. Saiti ɗaya na na'urar niƙa don zanen gado masu laminated
Daidaita Takarda:
1. 70g-190g. Takardar Kraft (takardar kraft mai launin rawaya. Takardar kraft mai farin fari). Takarda mai rufi + (laminated). Takardar takarda da sauransu.
Ka'idojin karɓar samfur:
1. Saurin ≥ 60 a minti daya. Takardar kraft 120g/㎡ (takardar da aka rufe da laminated).
2. Saurin ≥ 55 a minti daya. Takardar kraft 70g/㎡.
3. Faɗin walda 18-20mm.
| Samfuri | LQ-35H | |
| Faɗin Jaka | Girman Jaka (mm) | 180-350 |
| Faɗin Ƙasa | 70-160 | |
| Tsawon Bututu | 280-540 | |
| Faɗin ... | Girman Takarda (mm) | 530-1050 |
| Tsawon Fakitin | 340-600 | |
| Tsawon Yanke Takarda da Rike | Girman Takarda (mm) | 152.4/188.4/228.6 |
| Faɗin Takarda Mai Riƙo | 90-100 | |
| Fitilar Kirtani | Girman kirtani | 76.2/94.2/114.3 |
| Tsawon Kibiya (mm) | 170-185 | |
| Naɗe Baki (mm) | 40-60 | |
| Amfani da Wutar Lantarki (KW) | 27 | |
| Babban | Girman Inji (mm) | 2050W |
| 2710H | ||
| 14680L | ||
| Injin Yin Riƙo | 1340W | |
| 2690H | ||
| 5410L | ||
| Matsakaicin gudu (Jakunkuna/minti) | 70 | |
| Girman Maƙallin: Siffar igiya 4-8mm Rike Takarda Mai Rike Dia Max 1000mm Nauyin Takarda Mai Rikewa Kimanin 120g/㎡ | ||
| Sashe | Alamar kasuwanci | Ƙasar asali |
| Bearing | TNT | Japan |
| Silinda mai iska | SMC | Japan |
| Bawul ɗin Solenoid | SMC | Japan |
| Mai haɗawa | PANASONIC | Japan |
| Akwatin Gear | TSUBAKI | Japan |
| Injin gear | SUMITOMO | Japan |
| Inverter | TOSHIBA | Japan |
| Famfon iska | ORION | Japan |
| Babban injin | SIMENS | Jamus |
1. Injin yin hannu
Wannan injin yana sanya igiyar riƙo tsakanin takardu guda biyu kuma yana gyara shi tare da manne mai zafi a matsayin riƙon hannu. Kayan riƙon na iya zama igiyar takarda mai murɗawa, igiyar pp mai murɗawa, igiyar resin acrylic, da sauransu. Injin yin riƙon yana aiki a layi ɗaya da babban injin. Yana yiwuwa a sanya shi a kowane gefen babban injin gwargwadon sararin da ake buƙata.
2. Na'urar manna (kwali)
Manna hannuwa da aka yi ta hanyar injin yin hannu ko kwali zuwa bakin babban takardar takarda da kuma naɗewa. Wannan na'urar liƙawa ce ta hannaye ko kwali (salon liƙa biyu)
3. Na'urar naushi
Wannan na'urar tana huda ramuka biyu da kuma ramuka huɗu, yawanci akwai nau'ikan ramuka guda uku, 4, 6 da 8mm. Kuma an haɗa nisan ramukan nau'i biyu, 80 zuwa 200mm. Yana yiwuwa a saita tsarin yanke ramukan nau'in ayaba azaman zaɓi.
4. Na'urar Daidaitawa Mai Sauri
Ana sarrafa daidaita layin gabobi da daidaita matsin lamba ta hanyar nunin dijital, wanda hakan ke rage lokacin daidaitawa da inganta ingancin samarwa.
5. Silinda Buɗewa ta Ƙasa
Kawai ana buƙatar daidaita gefe ɗaya na silinda, sauran ɓangarorin biyu za a daidaita su ta atomatik. Lokacin daidaitawa ya ragu sosai da ingantaccen aiki.
6. Na'urar Tarawa ta atomatik
Zai iya ƙididdige adadin ta atomatik kuma ya fi dacewa a tattara jakunkuna.
